Reset Airbag Codes After Accident in a Salvage Car

That airbag light won’t go away if your car has been an accident or you bought a salvage car to rebuilt. You need an SRS airbag module reset service to clear all crash codes. The SRS airbag control module is the restraint unit that controls all SRS components from seat belts to the airbags. Every vehicle has impact sensors that detect that crash and send signals to the airbag computer to deploy the appropriate airbags and/or seat belt pretensioners. During the crash, data is stored unto the module such as the speed, deployment information, physical position of passengers or occupants as well as brake application. This data is different to codes such as “pretensioner resistance too high” or “occupant sensor fault”. Regular codes, referred to as “soft codes” are simple warning that can be reset using an OBD airbag scan tool after replacing the faulty components. Crash data, however, can not be reset and is designed by airbag manufacturers to be permanent. The good part about this, is that only 1 chip is affected. Safety Restore programmers are able to clear this crash data and reprogram your module back to factory OEM condition to work like new. This does not mean that you can ignore all the faults and not replace the airbags or get the seat belt pretensioners repaired. You still have to do that! But we can save you hundreds of dollars by reprogramming your existing SRS airbag module instead of buying a new replacement unit. The service is fast and affordable!

How Airbag Module Reset Service Works

The airbag module reset service requires you to remove your airbag computer out of the car and mail it in for a reset. A programming service that is completed within 24 hours of receiving.

The airbag module reset service is compatible with all makes & models including Honda, Acura, Nissan, Infiniti, Scion, Toyota, Lexus, Subaru, Mazda, Hyundai, Kia, Ford, Chevy, GMC and more!

Your satisfaction is 100% guaranteed with Safety Restore or your money back!

Order our SRS Airbag Module Reset Service today for only $49.99

Seat Belt Repair After Accident

In addition to the airbag module reset service, we also offer seat belt repair services after accident! Refurbishing all locked and blown seat belt retractors, pretensioners and buckled starting at $64.99. We use OEM parts to rebuild all seatbelts and recharge every pretensioner to be ready for deployment in case your vehicle gets into another accident. Your airbag light will go off and you will save yourself hundreds or even thousands of dollars! Don’t buy new seat belts at the dealer, visit SafetyRestore.com to save today!

Leave a Reply

Your email address will not be published. Required fields are marked *